Metro
Metro
32″Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 302211 | Front Dect w/decals & dogleg | ||
| 322143 | Deck weldmt | |||
| 2 | 302189 | Baffle wldmnt, dogleg | ||
| 3 | 800270 | 5/19-18 x 5/8 HHCS | ||
| 4 | 809001 | 5/16-18 Whizlock nut | ||
| 5 | 302128 | Arm weldmt | ||
| 6 | 303542 | O-Ring | ||
| 7 | 811006 | Zerk, 1/4-28 STRT | ||
| 8 | 323385 | Knob, belt cover | ||
| 9 | 809020 | Quick pin, 10" caster | ||
| 10 | 804256 | 5/16-18 Nylock hex nut | ||
| 11 | 800293 | 3/8-16 x 1 1/4 HH capscrew | ||
| 12 | 809007 | 3/8-16 whizlock nut | ||
| 13 | 805259 | 3/8 Flatwasher | ||
| 14 | 303327 | 3/8 Disc spring washer | ||
| 15 | 802080 | 5/16 x 1 Clevis pin | ||
| 16 | 303105 | Yoke | ||
| 17 | 806003 | Cotter hairpin | ||
| 18 | 808505 | E-Ring for 875 rd | ||
| 19 | 803003 | 3/8-16 x 1 3/4 Whizlock bolt | ||
| 323515 | Blade, 16 1/4" High Lift | |||
| 403148 | Blade, Mulching | Requires installation of Micro-Mulch accessory for proper mulching, Mulch kit P/N's MK322(32") Exmark red touch up spray paint - P/N 850337 | ||
| 403149 | Blade, Low Lift (32") optional | |||
| 21 | 513338 | Washer, special | ||
| 22 | 805008 | 1/2 spring lockwasher | ||
| 23 | 804509 | 1/2-13 Hex nut | ||
| 24 | 800334 | 1/2-13 x 6 HH capscrew | ||
| 25 | 303352 | Washer, special | ||
| 26 | 513648 | Wheel & tire, complete | ||
| 513807 | Wheel & hub | |||
| 513808 | Tire, 9 x 3.50-4 4-ply | |||
| 513809 | Roller bearing | |||
| 513810 | Bushing | |||
| 27 | 323345 | Drive belt (to blades) | ||
| 28 | 803310 | Setscrew, 5/16-18 x 3/8 | Use Pro-lock Nut Type (p/n 840022.5 ml tube) on setscrews | |
| 29 | 800273 | 5/6-18 x 1 HH capscrew | ||
| 30 | 513547 | Spacer, front caster | ||
| 31 | 303537 | Stud, belt shield (short) | ||
| 32 | 303536 | Stud, belt shield (long) | ||
| 324194 | Shield w/decals, | |||
| 322149 | Shield weldmt, | |||
| 34 | 323417 | Washer, belt cover mount | ||
| 35 | 322145 | Fork wldmnt, caster | ||
| 36 | 322154 | Caster wheel assembly | ||
| 37 | 302054 | Chute | ||
| 38 | 302129 | Engagement arm w/bushing | ||
| 39 | 303144 | Power metal bearing | ||
| 40 | 800290 | 3/8-16 x 3/4 HH capsrw ( Gr5) | ||
| 41 | 603843 | Idler pulley (heavy duty) | ||
| 42 | 322166 | Cutter housing w/sheave | ||
| 43 | 323402 | Spacer, bearing sheave | ||
| 44 | 323408 | Dust shield | ||
| 45 | 808506 | Retaining ring | ||
| 46 | 303543 | Cutter housing bearing | ||
| 47 | 323315 | Cutter housing | ||
| 48 | 811011 | 1/8 N.P.T. Straight zerk | ||
| 49 | 322164 | Cutter spindle wldmnt | ||
| 50 | 323400 | Spacer (long) | ||
| 51 | 323399 | Spacer (short) | ||
| 52 | 323339 | Retaining washer, sheave | ||
| 53 | 303535 | Pulley, cast iron | ||
| 54 | 804510 | 5/8-18 UNF Capscrw (Gr 5) | ||
| 55 | 800861 | 5/8-18 x 8 HH Capscrw (Gr 5) | ||
| 56 | 807267 | Key, 1/4 x 3/16 x 1/1/4 | ||
| 57 | 303164 | Spacer, blade drive | ||
| 58 | 513208 | 5/8 Spring disc washer | ||
| 59 | 303434 | Engagement bushing | ||
| 60 | 303348 | Eye bolt (left hand thread) | ||
| 61 | 303236 | Turnbuckle body | ||
| 62 | 303238 | Eye bolt (right hand thread) | ||
| 63 | 302198 | Assist arm | ||
| 64 | 809011 | 3/8 x 3/4 Shoulder bolt | ||
| 65 | 323303 | Assist arm linkage | ||
| 66 | 322153 | Caster/mount, complete | ||
| 67 | 302203 | Caster wheel support w/bearings | ||
| 68 | 302194 | Caster wheel support wldmnt | ||
| 69 | 811001 | Grease zerk, 1/8 N.P.T | ||
| 70 | 303514 | Flange, thrust bearing | ||
| 71 | 303314 | Spacer, 10" caster |
36″Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 302211 | Front Dect w/decals & dogleg | ||
| 322143 | Deck weldmt | |||
| 2 | 302189 | Baffle wldmnt, dogleg | ||
| 3 | 800270 | 5/19-18 x 5/8 HHCS | ||
| 4 | 809001 | 5/16-18 Whizlock nut | ||
| 5 | 302128 | Arm weldmt | ||
| 6 | 303542 | O-Ring | ||
| 7 | 811006 | Zerk, 1/4-28 STRT | ||
| 8 | 323385 | Knob, belt cover | ||
| 9 | 809020 | Quick pin, 10" caster | ||
| 10 | 804256 | 5/16-18 Nylock hex nut | ||
| 11 | 800293 | 3/8-16 x 1 1/4 HH capscrew | ||
| 12 | 809007 | 3/8-16 whizlock nut | ||
| 13 | 805259 | 3/8 Flatwasher | ||
| 14 | 303327 | 3/8 Disc spring washer | ||
| 15 | 802080 | 5/16 x 1 Clevis pin | ||
| 16 | 303105 | Yoke | ||
| 17 | 806003 | Cotter hairpin | ||
| 18 | 808505 | E-Ring for 875 rd | ||
| 19 | 803003 | 3/8-16 x 1 3/4 Whizlock bolt | ||
| 323515 | Blade, 16 1/4" High Lift | |||
| 403148 | Blade, Mulching | Requires installation of Micro-Mulch accessory for proper mulching, Mulch kit P/N's MK322(32") Exmark red touch up spray paint - P/N 850337 | ||
| 403149 | Blade, Low Lift (32") optional | |||
| 21 | 513338 | Washer, special | ||
| 22 | 805008 | 1/2 spring lockwasher | ||
| 23 | 804509 | 1/2-13 Hex nut | ||
| 24 | 800334 | 1/2-13 x 6 HH capscrew | ||
| 25 | 303352 | Washer, special | ||
| 26 | 513648 | Wheel & tire, complete | ||
| 513807 | Wheel & hub | |||
| 513808 | Tire, 9 x 3.50-4 4-ply | |||
| 513809 | Roller bearing | |||
| 513810 | Bushing | |||
| 27 | 323345 | Drive belt (to blades) | ||
| 28 | 803310 | Setscrew, 5/16-18 x 3/8 | Use Pro-lock Nut Type (p/n 840022.5 ml tube) on setscrews | |
| 29 | 800273 | 5/6-18 x 1 HH capscrew | ||
| 30 | 513547 | Spacer, front caster | ||
| 31 | 303537 | Stud, belt shield (short) | ||
| 32 | 303536 | Stud, belt shield (long) | ||
| 324194 | Shield w/decals, | |||
| 322149 | Shield weldmt, | |||
| 34 | 323417 | Washer, belt cover mount | ||
| 35 | 322145 | Fork wldmnt, caster | ||
| 36 | 322154 | Caster wheel assembly | ||
| 37 | 302054 | Chute | ||
| 38 | 302129 | Engagement arm w/bushing | ||
| 39 | 303144 | Power metal bearing | ||
| 40 | 800290 | 3/8-16 x 3/4 HH capsrw ( Gr5) | ||
| 41 | 603843 | Idler pulley (heavy duty) | ||
| 42 | 322166 | Cutter housing w/sheave | ||
| 43 | 323402 | Spacer, bearing sheave | ||
| 44 | 323408 | Dust shield | ||
| 45 | 808506 | Retaining ring | ||
| 46 | 303543 | Cutter housing bearing | ||
| 47 | 323315 | Cutter housing | ||
| 48 | 811011 | 1/8 N.P.T. Straight zerk | ||
| 49 | 322164 | Cutter spindle wldmnt | ||
| 50 | 323400 | Spacer (long) | ||
| 51 | 323399 | Spacer (short) | ||
| 52 | 323339 | Retaining washer, sheave | ||
| 53 | 303535 | Pulley, cast iron | ||
| 54 | 804510 | 5/8-18 UNF Capscrw (Gr 5) | ||
| 55 | 800861 | 5/8-18 x 8 HH Capscrw (Gr 5) | ||
| 56 | 807267 | Key, 1/4 x 3/16 x 1/1/4 | ||
| 57 | 303164 | Spacer, blade drive | ||
| 58 | 513208 | 5/8 Spring disc washer | ||
| 59 | 303434 | Engagement bushing | ||
| 60 | 303348 | Eye bolt (left hand thread) | ||
| 61 | 303236 | Turnbuckle body | ||
| 62 | 303238 | Eye bolt (right hand thread) | ||
| 63 | 302198 | Assist arm | ||
| 64 | 809011 | 3/8 x 3/4 Shoulder bolt | ||
| 65 | 323303 | Assist arm linkage | ||
| 66 | 322153 | Caster/mount, complete | ||
| 67 | 302203 | Caster wheel support w/bearings | ||
| 68 | 302194 | Caster wheel support wldmnt | ||
| 69 | 811001 | Grease zerk, 1/8 N.P.T | ||
| 70 | 303514 | Flange, thrust bearing | ||
| 71 | 303314 | Spacer, 10" caster |
48″Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 402096 | Front Deck w/decals & dogleg | Deck weldmt does not include flow control baffles - Flow control baffle kit is available P/N 401002 | |
| 402091 | Deck Weldmt, | Deck weldmt does not include flow control baffles - Flow control baffle kit is available P/N 401002 | ||
| 2 | 302189 | Baffle, dogleg | ||
| 3 | 800270 | 5/16-18 x 5/8 HH capscrew | ||
| 4 | 809001 | 5/16-18 Whizlock nut | ||
| 5 | 804256 | 5/16-18 Nylock hex nut | ||
| 6 | 800293 | 3/8-16 x 1 1/4 HH capscrew | ||
| 7 | 809007 | 3/8-16 whizlock nut | ||
| 8 | 303327 | 3/8 disc spring washer | ||
| 9 | 808280 | 5/16 x 1 Clevis pin | ||
| 10 | 303105 | Yoke | ||
| 11 | 403119 | Idler pulley "V" | ||
| 12 | 808505 | E- Ring for 875 rd | ||
| 13 | 323515 | Blade, Ultra High Lift 16" | ||
| 403148 | Blade, mulching | Requires installlation of Micro-Mulch accessory for proper mulching. Mulch kit P/N's MK 482 | ||
| 403149 | Blade, Low Lift (48") optional | |||
| 14 | 323303 | Assist arm linkage | ||
| 15 | 803310 | Setscrew, 5/16-18 x 3/8 | Use Pro-lock Nut Type (p/n 840022. 5ml tube) on setscrews | |
| 16 | 800273 | 5/16-18 x 1 HH capscrew | ||
| 17 | 402052 | Arm weldmt, RH | ||
| 18 | 603843 | Idler pulley | ||
| 19 | 322166 | Cutter Housing w/sheave (LH) | ||
| 20 | 323408 | Dust shield | ||
| 21 | 808506 | Retaining ring | ||
| 22 | 303543 | Cutter housing bearing | ||
| 23 | 323315 | Cutter housing | ||
| 24 | 811001 | 1/8 N.P.T. Straight zerk | ||
| 25 | 322164 | Cutter spindle wldmnt (LH) | ||
| 26 | 323400 | Spacer (long) | ||
| 27 | 323399 | Spacer (short) | ||
| 28 | 807267 | Key, 1/4 x 3/16 x 1 1/4 | ||
| 29 | 303535 | Pulley, cast iron | ||
| 30 | 513208 | 5/8 Spring disc washer | ||
| 31 | 800861 | 5/8-18x8 HH Capscrew(Gr5) | ||
| 32 | 303164 | Spacer, blade drive | ||
| 33 | 323339 | Washer, retainer (Sheave) | ||
| 34 | 323402 | Spacer, bearing (Sheave) | ||
| 35 | 804510 | 5/8-18 UNF hex nut | ||
| 36 | 303434 | Engagement bushing | ||
| 37 | 303348 | Eye bolt (left hand thread) | ||
| 38 | 303236 | Turnbuckle body | ||
| 39 | 303238 | Eye bolt (right hand thread) | ||
| 40 | 809011 | 3/8 x 3/4 Shoulder bolt | ||
| 41 | 806003 | Cotter hairpin | ||
| 42 | 303352 | Washer, spindle | ||
| 43 | 402053 | Idler arm, complete (w/bushing) | ||
| 44 | 303144 | Power metal bearing | ||
| 45 | 402077 | Cutter Housing w/sheave (center) | ||
| 46 | 302128 | Arm weldmt | ||
| 47 | 303542 | O-Ring | ||
| 48 | 811006 | Zerk 1/4-28 STRT | ||
| 49 | 805259 | 3/8 Flatwasher | ||
| 50 | 800295 | 3/8-16 x 1 3/4 HH capscrew | ||
| 51 | 402075 | Cutter spindle wldmnt, center (long) | ||
| 52 | 302054 | Chute | ||
| 53 | 403107 | Belt tension rod | ||
| 54 | 603496 | Bushing, idler bearing | ||
| 55 | 403133 | Double pulley | ||
| 56 | 403025 | V-Belt,front deck | ||
| 57 | 800862 | 5/8-18 x 8 1/2 HH capscrew Gr5 | ||
| 58 | 302129 | Engagement arm w/bushing | ||
| 59 | 323300 | Drive belt (main deck) | ||
| 60 | 323404 | Spacer, bearing (center sheave) | ||
| 61 | 803003 | 3/8-16 x 1 3/4 Whizlock bolt | ||
| 62 | 302198 | Assist arm | ||
| 1 | 322153 | Caster/mount, complete | ||
| 2 | 302203 | Caster wheel support w/bearings | ||
| 3 | 302194 | Caster wheel support wldmnt | ||
| 4 | 811001 | Grease zerk, 1/8 N.P.T. | ||
| 5 | 303514 | Flange, thrust bearing | ||
| 6 | 303314 | Spacer, 10" caster | ||
| 7 | 322154 | Caster wheel assembly | ||
| 8 | 322145 | Fork wldmnt, caster | ||
| 9 | 513547 | Spacer, front caster | ||
| 10 | 513648 | Wheel & tire, complete | ||
| 513807 | Wheel & hub | |||
| 513808 | Tire, 9 x 3.50-4 4-ply | |||
| 513809 | Roller bearing | |||
| 513810 | Bushing | |||
| 11 | 403145 | Rubber bumper | ||
| 12 | 800290 | 3/8-16 x 3/4 HH capscrew | ||
| 13 | 809007 | 3/8-16 Whizlock nut | ||
| 14 | 809001 | 5/16-18 Whizlock nut | ||
| 15 | 800334 | 1/2-13 x 16 HH capscrw | ||
| 16 | 804509 | 1/2-13 Hex nut | ||
| 17 | 805008 | 1/2 spring lockwasher | ||
| 18 | 513338 | Washer, special | ||
| 19 | 809020 | Quick pin, 10" caster | ||
| 20 | 303537 | Stud, belt shield (short) | ||
| 21 | 303536 | Stud, belt shield (long) | ||
| 22 | 323385 | Knob, belt cover | ||
| 23 | 404172 | Shield w/decals | ||
| 402064 | Shield weldmt, | |||
| 24 | 323417 | Washer, belt cover mount |
52″Mower Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 322153 | Caster/mount, complete | ||
| 2 | 302203 | Caster wheel support w/bearings | ||
| 3 | 302194 | Caster wheel support wldmnt | ||
| 4 | 811001 | Grease zerk, 1/8 N.Pt. | ||
| 5 | 303514 | Flange, thrust bearing | ||
| 6 | 303314 | Spacer,10" caster | ||
| 7 | 322154 | Caster wheel assembly | ||
| 8 | 322145 | Fork wldmnt, caster | ||
| 9 | 513547 | Spacer, front caster | ||
| 10 | 513648 | Wheel & tire, complete | ||
| 513807 | Wheel & hub | |||
| 513808 | Tire, 9 x 3.50-4 4-ply | |||
| 513809 | Roller bearing | |||
| 513810 | Bushing | |||
| 11 | 809007 | 3/8-16 Whizlock nut | ||
| 12 | 809001 | 5/16-18 Whizlock nut | ||
| 13 | 808505 | E-Ring for .875 rd | ||
| 14 | 806003 | Cotter hairpin | ||
| 15 | 800334 | 1/2-13 x 6 HH capscrew | ||
| 16 | 804509 | 1/2-13 Hex nut | ||
| 17 | 805008 | 1/2 spring lockwasher | ||
| 18 | 513338 | Washer, special | ||
| 19 | 809020 | Quick pin, 10" caster | ||
| 20 | 303537 | Stud, belt shield (short) | ||
| 21 | 303536 | Stud, belt shield (long) | ||
| 22 | 323301 | Drive belt | ||
| 23 | 323385 | Knob, belt cover | ||
| 24 | 303327 | 3/8 Disc washer | ||
| 25 | 303352 | Washer, Spindle | ||
| 26 | 373034 | Washer, pivot | ||
| 27 | 402053 | Idler arm, complete (right) | ||
| 28 | 303144 | Bushing , powdered metal | ||
| 29 | 403107 | Belt tension rod | ||
| 30 | 403119 | Pulley, idler "V" | ||
| 31 | 404163 | Shield w/decals 52" Metro | ||
| 402069 | Shield weldmt, 52" Metro | |||
| 32 | 323417 | Washer, belt cover mount | ||
| 33 | 513291 | Bumper, rubber | ||
| 34 | 603299 | Roller, anti-scalp | ||
| 35 | 603496 | Bushing, idler bearing | ||
| 36 | 603602 | Bushing, roller | ||
| 37 | 602571 | Chute | ||
| 38 | 800273 | 5/16-18 x 1 HH capscrew | ||
| 39 | 800290 | 3/8-16 x 3/4 HH capscrew | ||
| 40 | 800295 | 3/8-16 x 1 3/4 HH capscrew | ||
| 41 | 800807 | 3/8-16 x 4 HH capscrew Gr.8 | ||
| 42 | 804256 | 5/16-18 Nylock hex nut | ||
| 43 | 805259 | 3/8 Flat washer | ||
| 44 | 402052 | Arm weldmt | ||
| 1 | 402060 | Decj weldmt w/decals & dogleg | Deck weldmt does not include flow control baffles - Flow control baffle kit is available P/N 611104 | |
| 402079 | Deck weldmt | Deck weldmt does not include flow control baffles - Flow control baffle kit is available P/N 611104 | ||
| 402101 | Deck weldmt w/decals & dogleg | Deck weldmt does include welded in flow control baffles | ||
| 402098 | Deck weldmt | Deck weldmt does include welded in flow control baffles | ||
| 2 | 402057 | Baffle wldmnt, discharge | ||
| 3 | 800270 | 5/16-18 x 5/8 HHCS | ||
| 4 | 809001 | 5/16-18 Whizlock nut | ||
| 5 | 303327 | 3/8 Disc spring washer | ||
| 6 | 403105 | V-Belt, front deck | ||
| 7 | 633482 | Blade, High Lift 18" | ||
| 633485 | Blade, Low Lift | |||
| 633484 | Blade, mulching | Requires installation of Micro-Mulch accessory for proper mulching. Mulch kit P/N's Mk522 (units without flow control baffles welded in deck) or MK523 ( Units with flow control baffles welded in deck) | ||
| 8 | 302128 | Arm weldmt | ||
| 9 | 811006 | Zerk, 1/4-28 STRT | ||
| 10 | 809007 | 3/8-16 Whizlock nut | ||
| 11 | 803310 | Setscrew, 5/16-18 x 3/8 | Use Pro-lock Nut Type (p/n 840022. 5 ml tube) on setscrews | |
| 12 | 800273 | 5/16-18 x 1 HH capscrew | ||
| 13 | 808505 | E-Ring for .875 rd | ||
| 14 | 322166 | Cutter housing w/sheave (LH) | ||
| 15 | 323408 | Dust shield | ||
| 16 | 808506 | Retaining ring | ||
| 17 | 303543 | Cutter housing bearing | ||
| 18 | 323315 | Cutter housing | ||
| 19 | 811001 | 1/8 N.P.T. Straight zerk | ||
| 20 | 322164 | Cutter spindle wldmnt | ||
| 21 | 323399 | Spacer (Short) | ||
| 22 | 323400 | Spacer (long) | ||
| 23 | 303535 | Pulley, cast iron | ||
| 24 | 513208 | 5/8 Spring disc washer | ||
| 25 | 800861 | 5/8-18 x 8 HH Capscrw (Gr 5) | ||
| 26 | 804510 | 5/8-18 UNF hex nut | ||
| 27 | 323339 | Washer, retainer (Sheave) | ||
| 28 | 323402 | Spacer, bearing | ||
| 29 | 807267 | Key, 1/4 x 3/16 1 1/4 | ||
| 30 | 303164 | Spacer, blade drive | ||
| 31 | 303105 | Yoke | ||
| 32 | 303352 | Washer, spindle | ||
| 33 | 303434 | Engagement bushing | ||
| 34 | 303348 | Eye bolt (left hand thread) | ||
| 35 | 303236 | Turnbukle body | ||
| 36 | 303238 | Eye bolt (right hand thread) | ||
| 37 | 809011 | 3/8 x 3/4 Shoulder bolt | ||
| 38 | 806003 | Cotter hairpin | ||
| 39 | 302198 | Assist arm | ||
| 40 | 323305 | Assist arm linkage | ||
| 41 | 302129 | Engagement arm w/bushing | ||
| 42 | 303144 | Bushing, powdered metal | ||
| 43 | 543879 | Bushig, idler | ||
| 44 | 603843 | Idler pulley (heavy duty) | ||
| 45 | 402077 | Cutter housing w/sheave (Center) | ||
| 46 | 303542 | O-Ring | ||
| 47 | 808280 | 5/16 x 1 Clevis pin | ||
| 48 | 805259 | 3/8 Flatwasher | ||
| 49 | 804256 | 5/16-18 Nylock hex nut | ||
| 50 | 803003 | 3/8-16 x 1 3/4 Whizlock bolt | ||
| 51 | 402075 | Cutter spindle wldmnt (long) | ||
| 52 | 800293 | 3/8-16 x 1 1/4 HH capscrew | ||
| 53 | 800029 | 3/8-16 x 2 1/4 HH tap bolt | ||
| 54 | 403133 | Double pulley | ||
| 55 | 323404 | Spacer, bearing (center sheave) | ||
| 56 | 800862 | 5/8-18 x 8 1/2 HH capscrew, Gr 5 |
Engine Deck Group
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 322201 | Rear deck | ||
| 2 | 323500 | Transmission | ||
| 3 | 323501 | Coupling, transmission shaft | ||
| 4 | 323502 | Output shaft, transmission | ||
| 5 | 323326 | Nipple (galvanized) 3/8 NPT x 3.0 | Use Teflon Pipe Sealant (or equivalent) on all threaded areas | |
| 6 | 323252 | Shaft bearing, transmission | ||
| 7 | 323254 | Bearing flange, transmission shaft | ||
| 8 | 323257 | Sheave, wheel drive, 3 1/4" | ||
| 323363 | Sheave, wheel drive, 3 1/4" | (32") | ||
| 9 | 808523 | Retaining ring | ||
| 10 | 805005 | 5/16 spring lockwasher | ||
| 11 | 323256 | Sheave, transmission drive, 2 3/4" | ||
| 12 | 807264 | 1/4 sq. x 2 5/8 Key | ||
| 13 | 323280 | Belt, transmission | ||
| 14 | 809007 | 3/8-16 Whizlock nut | ||
| 15 | 804257 | 3/8-16 Nylock nut | ||
| 16 | 323387 | Shifter plate | ||
| 17 | 323389 | Leg, shifter lever | ||
| 18 | 807503 | 5/16-18 x 3/4 Carriage bolt | ||
| 19 | 809001 | 5/16-18 Whizlock nut | ||
| 20 | 322110 | Belt guide wldmnt | (32" and 36") | |
| 322110 | Belt guide wldmnt | (48" and 52") | ||
| 21 | 323526 | Ball S.S. detent | ||
| 22 | 323228 | Spacer, belt guide | (32" and 36") | |
| 323228 | Spacer, belt guide | (48" and 52") | ||
| 23 | 301024 | Kit, Metro transmission | ||
| 24 | 303334 | 5/16 disc spring washer | ||
| 25 | 809001 | 5/16-18 Whizlock nut (Only with B/S engine) | ||
| 26 | 800283 | 5/16-18 x 3 1/2 HH capscrew (with 32" Model 8.5 HP B&S Engine) | Torque Engine Mounting Bolts: Briggs & Stratton to 15-20 ft-lbs / Kohler & Kawasaki to 25-30 ft-lbs | |
| 809065 | M8-1.25 x 75mm HH capscrew (32" and 36" Kawasaki & Kohler) | |||
| 809065 | M8-1.25 x 75mm HH capscrew (48" and 52" Kawasaki & Kohler) | |||
| 27 | 800275 | 5/16-18 x 1 1/2 HH capscrew (With 32" Model 8.5 HP B&S Engine) | Torque Engine Mounting Bolts: Briggs & Stratton to 15-20 ft-lbs / Kohler & Kawasaki to 25-30 ft-lbs | |
| 809072 | M8-1.25 x 25mm HH capscrew (32" & 36" Kawasaki & Kohler) | |||
| 809072 | M8-1.25 x 25mm HH capscrew (48" & 52" Kawasaki & Kohler) | |||
| 28 | 303431 | St.Elbow (brass) 3/8 NPT | Use Teflon Pipe Sealant (or equivalent) on all threaded areas | |
| 29 | 800292 | 3/8-16 x 1 HH capscrew | ||
| 30 | 323318 | Hitch bracket | ||
| 31 | 809013 | 5/16-18 x 3/4 Tapping screw | ||
| 32 | 303186 | Bell crank | ||
| 33 | 323278 | Sheave, transmission drive | ||
| 34 | 543233 | Cap (hex) 3/8 NPT | Use Teflon Pipe Sealant (or equivalent) on all threaded areas | |
| 35 | 303327 | 3/8 Spring disc washer | ||
| 36 | 804264 | 3/8-24 Hex nylock nut | ||
| 37 | 807009 | 3/16 x 3/4 Woodruff key | ||
| 38 | 303282 | Neutral start switch | ||
| 39 | 807511 | 3/8-16 x 2 Carriage bolt, SSN | ||
| 40 | 805262 | 7/16 Std. flatwasher | ||
| 41 | 323285 | Idler pulley, transmission drive | ||
| 42 | 805259 | 3/8 SAE flatwasher | ||
| 43 | 800251 | 1/4-20 x 5/8 HH capscrew | ||
| 44 | 804255 | 1/4-20 Nylock nut | ||
| 45 | 603403 | 1/2 x 1 Shoulder bolt | ||
| 46 | 301023 | Sulky Hitch Kit, Metro | ||
| 47 | 513051 | Blade engagement switch | ||
| 48 | 800271 | 5/16-18 x 3/4 HH capscrew | ||
| 49 | 803028 | 10-24 x 5/8 Pan Hd | ||
| 50 | 804252 | 10-24 Nylock nut | ||
| 51 | 323376 | Shift lever | ||
| 52 | 303020 | Foam grip | ||
| 53 | 811006 | 1/4-28 Grease zerk (straight) | ||
| 54 | 303498 | Pulley, blade drive (6 1/8") (For 36" and 52" Models) | Apply anti-seize compound to pulley bore (blade drive pulley) | |
| 403087 | Pulley, blade drive (6 3/4") (For 32" and 48" Models) | |||
| 55 | 803310 | 5/16-18 x 3/8 Cuppoint setscrew | Use Pro-lock (Nut type) Part No. 840022 (.5mm tube) on setscrew threads | |
| 56 | 803050 | 5/16-18 x 3/4 Sq. Setscrew | Use Pro-lock (Nut type) Part No. 840022 (.5mm tube) on setscrew threads | |
| 57 | 803293 | 1/4-20 x 3/8 Cuppoint setscrew | Use Pro-lock (Nut type) Part No. 840022 (.5mm tube) on setscrew threads | |
| 58 | 323379 | Washer, shifter lever | ||
| 59 | 803046 | 5/16-18 x 1 Sq. setscrew | Use Pro-lock (Nut type) Part No. 840022 (.5mm tube) on setscrew threads | |
| 1 | 322113 | Brake arm wldmnt | ||
| 2 | 811006 | 1/4-28 Grease Zerk (straight) | ||
| 3 | 322117 | Alxe wldmnt | ||
| 322141 | Alxe wldmnt | (32" Model) | ||
| 4 | 808520 | Klipring (for 31 shaft) | ||
| 5 | 322119 | Idler arm wldmnt (LH) | ||
| 6 | 806003 | Cotter hairpin, #2 | ||
| 7 | 322121 | Idler arm wldmnt (RH) | ||
| 8 | 808522 | Klipring (for 3/8 shaft) | ||
| 9 | 323288 | Belt, wheel drive | ||
| 323344 | Belt, wheel drive | (32" Model) | ||
| 10 | 809001 | 5/16-18 Whizlock nut | ||
| 11 | 323262 | Brake band | ||
| 12 | 322125 | Swivel wldmnt, brake linkage | ||
| 13 | 322123 | Scraper wldmnt | ||
| 603430 | Scraper | (32" Model) | ||
| 14 | 804256 | 5/16-18 Nylock nut | ||
| 15 | 323277 | Idler pulley, wheel drive | ||
| 323352 | Idler pulley, wheel drive | (32" Model) | ||
| 16 | 800274 | 5/16-18 x 1 1/4 HH capscrew | ||
| 17 | 800032 | 3/8-16 x 3 HH Tap bolt | ||
| 18 | 809007 | 3/8-16 Whizlock nut | ||
| 19 | 804257 | 3/8-16 Nylock nut | ||
| 20 | 323287 | Shield, wheel drive | ||
| 21 | 323283 | Spacer | ||
| 22 | 603402 | Drive spring | ||
| 23 | 323296 | Brake rod | ||
| 24 | 513959 | 5/16-18 Nylock wingnut | ||
| 25 | 800306 | 3/8-16 x 5 HH capscrew | ||
| 26 | 523157 | Spacer, wheel (14 Ga) | ||
| 543436 | Spacer, wheel (18 Ga) | |||
| 27 | 303327 | 3/8 Disc spring washer | ||
| 28 | 323307 | 3/8 Clevis pin | ||
| 29 | 803051 | 3/8 Pushnut | ||
| 30 | 323368 | Swivel, short adjust | ||
| 31 | 800292 | 3/8-16 x 1 HH capscrew | ||
| 32 | 324146 | Drive wheel, complete | ||
| 324193 | Drive wheel, complete | (32" Model) | ||
| 33 | 323253 | Sheave, wheel drive | (8" A) | |
| 34 | 323260 | spaccer, wheel sheave | ||
| 35 | 323261 | Brake drum | ||
| 36 | 323276 | Wheel and tire, complete | ||
| 323346 | Wheel & Tire, complete | (32" Model) | ||
| 37 | 303125 | Tire, 13 x 6.50 -6 (4-ply) | ||
| 323361 | Tire, 13 x 6.50 -6 (4-ply) | (32" Model) | ||
| 38 | 323328 | Wheel & hub w/bearings | (32" Model) | |
| 323360 | Wheel & hub w/bearings | |||
| 39 | 323329 | Bearing, flanged | ||
| 40 | 800273 | 5/16-18 x 1 HH capscrew | (32") | |
| 800274 | 5/16-18 x 1/4 HH capscrew | |||
| 41 | 805005 | 5/16 Spring washer | ||
| 42 | 808501 | E-Ring (for 1/2" shaft) | ||
| 43 | 323349 | Sheave, wheel drive | (32" Model) | |
| 44 | 808519 | E-Ring (for 1" shaft) | ||
| 45 | 373034 | Swivel washer | (32" Model only) |
Upper Handle And Controls
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 322190 | Handle weldmt, 5-Speed | ||
| 2 | 303097 | Handle grip | ||
| 3 | 302005 | Latch w/grip (left) | ||
| 4 | 303019 | Grip, latch | ||
| 5 | 302006 | Drive lever w/grip | ||
| 6 | 303021 | Grip, drive lever | ||
| 7 | 302007 | Latch w/grip (right) | ||
| 8 | 323229 | Clip, 3/8 Loom (Kaw) | ||
| 9 | 303435 | Washer, 1/4 disc spring | ||
| 10 | 323359 | Linkage, wheel drive | ||
| 11 | 804255 | 1/4-20 Nylock nut | ||
| 12 | 805256 | 1/4 STD. Flatwasher | ||
| 13 | 800257 | 1/4-20 x 1 3/4 HH capscrew | ||
| 14 | 323322 | Throttle cable (Kaw & Kohler) | ||
| 323377 | Throttle cable (8.5 HP, B&S) | |||
| 15 | 513592 | Knob, (red ball) | ||
| 16 | 303287 | Plastic tie, 5 1/2"(Kaw) | ||
| 303287 | Plastic tie, 5 1/2"(Kohler & B&S) | |||
| 17 | 804257 | 3/8-16 Nylock nut | ||
| 18 | 804252 | 10-24 Nylock hex nut | ||
| 19 | 807513 | 10-24 x 1/2 Carriage bolt | ||
| 20 | 806003 | Hairpin cotter | ||
| 21 | 808250 | 3/16 x 1 3/4 Clevis pin | ||
| 22 | 803001 | 3/16 Palnut | ||
| 23 | 806340 | 5/16 x 1 Rollpin | ||
| 24 | 805258 | 5/16 Std. flat washer | ||
| 25 | 302138 | Lever, OPC (RH) | OPC refers to Operator Presence Control. | |
| 26 | 803322 | 5/16-24 Setscrew | Use Pro-lock (Nut type) Part No.840022 (.5 mm tube) on | |
| 27 | 322188 | Lever, OPC (LH) | OPC refers to Operator Presence Control. | |
| 28 | 800292 | 3/8-16 x 1 HH capscrew | ||
| 29 | 303365 | Nylon bushing | ||
| 30 | 322192 | Connecting rod | ||
| 31 | 303471 | Fuel line, 12" (14 HP Kawasaki) | ||
| 32 | 303363 | Actuator spring | ||
| 33 | 303022 | Fuel line, 8.5" (12.5 HP Kawasaki) | ||
| 34 | 603954 | Fuel line, 13.75" (Kohler) | ||
| 35 | 303088 | Cable clip | ||
| 36 | 303160 | Compression spring | ||
| 37 | 804257 | 3/8-16 Nylock nut | ||
| 38 | 323298 | Linkage, blade drive | ||
| 39 | 322157 | Engagement lever, blade | ||
| 40 | 303020 | Grip, lever | ||
| 41 | 805260 | 3/8 Std. flatwasher | ||
| 42 | 800296 | 3/8-16 x 2 HH capscrew | ||
| 43 | 804255 | 1/4-20 Nylock nut | ||
| 44 | 413179 | Tank, gas | ||
| 45 | 513508 | Cap, fuel tank | ||
| 46 | 323370 | Clevis pin | ||
| 47 | 513645 | Bushing, fuel tank | ||
| 48 | 543277 | Elbow, 90 ° | ||
| 49 | 303077 | Clamp, fuel line (8.5 HP, B&S) | ||
| 303077 | Clamp, fuel line (Kawasaki) | |||
| 303077 | Clamp, fuel line (Kohler) | |||
| 50 | 800252 | 1/4-20 x 3/4 HH capscrew | ||
| 51 | 323229 | Clip, 3/8 Loom (Kohler & B&S) | ||
| 52 | 323430 | Interlock, OPC | OPC refers to Operator Presence Control. | |
| 53 | 303197 | Gas filter (Kawasaki & Kohler) | ||
| 54 | 603776 | Fuel line, 2.5"(Kaw.&Kohler) | ||
| 55 | 543296 | Grommet, fuel tank | ||
| 56 | 603770 | Fuel valve | ||
| 57 | 303308 | Clamp, fuel line (Kawasaki) | ||
| 58 | 603955 | Fuel line, 6" (8.5 HP, B&S) | ||
| 59 | 603955 | Fuel line, 6" (Kaw. & Kohler) | ||
| 60 | 323511 | Wiring harness (Kawasaki) | ||
| 323512 | Wiring harness (Kohler) | |||
| 323510 | Wiring harness (8.5 HP, B&S) | |||
| 61 | 633023 | Stud, gas tank | Not illustrated. Use Pro-Lock (Retaining) on inside of OPC hub (See Operator's Manual) & on fuel tank studs. | |
| 62 | 633349 | Spring, gas tank | ||
| 63 | 513051 | Switch | ||
| 64 | 633181 | Plate, tapped | ||
| 65 | 803028 | Screw | ||
| 66 | 805005 | Washer Lock 5/16 | ||
| 67 | 804256 | Nut, Nylock 5/16-18 | ||
| 68 | 800271 | Screw, 5/16-18X3/4 | ||
| 69 | 303335 | Plastic tie, large |
Decals
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 303001 | Decal, Choke (B&S 8.5 hp) | ||
| 2 | 303085 | Instruction Label | ||
| 3 | 303100 | Decal, Cutter Blade | ||
| 4 | 303102 | Neutral Lock Label | ||
| 5 | 303161 | Serial No. Plate | ||
| 6 | 303293 | Decal, 2 minute Cool | ||
| 7 | 323525 | Decal, Danger | ||
| 8 | 303508 | Decal, Discharge Warning | ||
| 9 | 303517 | Decal, Belt Drive | ||
| 10 | 303518 | Decal, Shifter | ||
| 11 | 303520 | Decal, TriVantage | ||
| 12 | 323410 | Decal, Commercial | 32" | |
| 13 | 323312 | Decal, Small Metro | ||
| 14 | 323151 | Decal, Throttle/Choke(Kawasaki & Kohler) | ||
| 15 | 323411 | Decal, Commercial | 36" | |
| 16 | 323412 | Decal, Large Metro | ||
| 17 | 403005 | Decal, Label | 48" & 52" | |
| 403005 | Decal, Label | 32" & 36" | ||
| 18 | 403080 | Decal, Patent | 32" | |
| 19 | 403131 | Decal, Commercial | 48" | |
| 20 | 403132 | Decal, Commercial | 52" | |
| 21 | 513746 | Decal, Muffler | ||
| 513746 | Decal, Muffler | 32" | ||
| 22 | 543631 | Decal, Throttle(B&S 8.5 hp) | ||
| 23 | 403139 | Decal, Belt Routing | 48" & 52" | |
| 24 | 403143 | Decal, Sulky Warning | ||
| 25 | 323427 | Decal, Belt Routing | 32" & 36" |